Car Users’ Concerns to Define Interior of Fully Autonomous Cars, Citing 5th Global Automotive Consumer Survey by Asahi Kasei

Fully autonomous cars will become mobile living rooms, allowing car manufacturers to reimagine the future of car interiors. In its fifth annual survey, the Japanese technology company Asahi Kasei asked car users in the four major automotive markets about their expectations and concerns regarding fully autonomous vehicles and their perception of sustainability. Customer preferences for interior design, features, and usage scenarios offer the automotive industry valuable hints about what the car of the future should look like.

The results of Asahi Kasei’s fifth global Automotive Consumer Survey present meaningful information about what customers in the four major automotive markets (Japan, China, Germany, and the United States) expect from autonomous vehicles and how they would spend their time in one.

Distrust in technology

Car users are still conservative regarding the operation of a fully autonomous car; a retractable steering wheel and pedals are not considered valuable to most respondents. This confirms the results of the last survey from 2022, which found that even in fully autonomous vehicles, a large proportion of users in Germany, the USA, and China prefer to have a steering wheel and brake pedal for optional manual control. In Japan, one in two share this outlook. In Germany and the USA, providing a manual control option could help increase acceptance of fully autonomous cars.

In addition, two out of three car users in Germany, the USA, and China stated they would still observe traffic while in autonomous mode—activities while in the car, such as watching movies or playing games, are at the bottom of the list (see Figure 1). This is another indication that car users today have safety and trust concerns about fully autonomous cars. These sentiments will profoundly define the interior design of the first generations of fully autonomous vehicles.

Silent cabin for communication and listening to music

When asked about the most valued interior aspect of an autonomous car, one out of two respondents mentioned “silent cabin” (see Figure 2). This speaks to the woes of many battery electric vehicle (BEV) users; almost every fourth user of a BEV mentioned “too much noise while driving” as the most annoying aspect of the driving experience. While the BEV itself is quieter than a car with an internal combustion engine (ICE), the noise of wind, tires, gears, and motors—sounds that are typically suppressed by the engine noise—becomes more prevalent. In fully autonomous electric vehicles, and with the ability to engage with other activities while commuting, silence will even become more important for customers.

Looking at activities while riding in an autonomous vehicle, listening to music and podcasts is the primary activity of car users worldwide while driving, with 66% in the USA, 61% each in China and Japan, and 56% in Germany. Talking with other passengers is equally high in ranking, with sleeping or working as less important, highlighting the need for tables or lie-flat seats.

Perception of sustainability differs among regions

Car users no longer define a “sustainable vehicle” only by its drivetrain technology but also by its carbon footprint in production, easily recyclable materials, and overall sustainable production along the entire value chain. Buyers’ understanding of sustainability is growing, and the relevance of this topic in the purchasing process has increased in recent years.

Respondents in the Western markets define a sustainable car by its use of recyclable materials and sustainable production along the value chain. Meanwhile, for car users in China and Japan, the drivetrain technology primarily defines a sustainable car (see Figure 3). This topic is becoming more relevant for the purchase decision process, particularly in Western countries, with 35% of all respondents in Germany and the USA indicating they would switch their car brand to a more sustainable manufacturer to support greener mobility.

https://www.asahi-kasei.com/.

#asahikasei#modernplasticsindia #modernplasticsasia #modernplastics#plasticsnews#plasticsplanet #modernrecyclingindia#modernplasticsglobal#modernplasticsworld#plasticstalk#modernplasticsgermany#modernplasticsnetwork #plasticdevelopment

XSYS Launches Nyloflex XSN For Superior Performance And Flexibility In narrow Web Printing

• Ideal for narrow web applications using UV, water-based, and solvent-based inks
• Inherent flat-top dot plate compatible with both thermal and solvent processing
• Enhanced formulation with CleanRelease Technology for reduced downtime and plate cleaning

XSYS is proud to announce the launch of nyloflex  XSN, the newest innovation in flexographic plates designed for narrow web printing. This plate combines unparalleled performance with maximum flexibility, catering to the diverse needs of narrow web printers who require efficiency and versatility without compromising on quality.

“With the nyloflex  XSN, we’ve introduced a plate that empowers narrow web printers to meet rapidly changing market demands with confidence,” said Florian Hoelzle, Product Manager for nyloflex  plates at XSYS. “It’s unique flat-top dot structure and new CleanRelease Technology ensure cleaner plates, longer print runs, and minimal press downtime, making it a game-changer in the narrow web segment.”

Key Features and Benefits

Performance & Flexibility for Narrow Web

The nyloflex  XSN is a flat-top dot plate compatible with both thermal and solvent processing methods, providing printers with unmatched versatility. This dual compatibility allows seamless adaptation to evolving customer demands without the need for additional equipment or process changes.

Clean Release Technology for Clean and Consistent Print jobs

Featuring the new CleanRelease Technology, the plate’s formulation prevents ink buildup on the plate surface. This innovation reduces the need for frequent cleanings and press stops, significantly improving Overall Equipment Efficiency (OEE).

Outstanding Compatibility with Various Ink types

The nyloflex  XSN is designed to perform exceptionally well with UV inks, as well as water-based and solvent-based inks. This compatibility ensures outstanding print quality across paper and film substrates.

Plug-and-Play with Existing Equipment

Engineered as an inherent flat-top dot plate, the nyloflex  XSN eliminates the need for additional exposure units or consumables. Printers can achieve superior results right out of the box, simplifying production workflows and reducing costs.

Fast Turnaround for High-Pressure Environments

Thanks to its compatibility with both thermal and solvent processing, the nyloflex XSN offers unparalleled flexibility for integrated printers needing quick design changes and efficient plate turnaround times.

Enabling Printers to be Brilliant

“At XSYS, our goal is to help customers achieve brilliance through innovative solutions that simplify production and enhance productivity,” said Florian. “The nyloflex  XSN embodies this vision by combining cutting-edge technology with practical usability, setting a new standard for narrow web printing.”

www.xsysglobal.com

#xsysglobal#modernplasticsindia #modernplasticsasia #modernplastics#plasticsnews#plasticsplanet #modernrecyclingindia#modernplasticsglobal#modernplasticsworld#plasticstalk#modernplasticsgermany#modernplasticsnetwork #plasticdevelopment

Orbia Alphagary Expands Manufacturing Capacity In Altamira Mexico To Meet Growing Customer Demand

Orbia Advance Corporation S.A.B. de C.V. (BMV: ORBIA) Polymer Solutions’ business group Alphagary, a leading global supplier of compounds and additives, announced today a significant expansion of its manufacturing facility in Altamira, Mexico. The company is installing a new production line designed to process materials with FDA-sanctioned ingredients, catering to applications in healthcare, food contact and skin contact industries. This expansion will add 15,000 tons per year to the facility’s production capacity.

The decision to expand comes in response to heightened market and customer demand, according to Santiago Urbina, Vice President Commercial at Orbia Alphagary. He said, “Our goal is to better serve our customers and respond effectively to growing market needs. Over the past several years, we’ve seen increased demand for specialized materials, particularly in sectors like healthcare and food safety, where the quality and safety of materials are paramount. By adding this new production line, we will be able to meet these demands more efficiently, while maintaining the high standards of quality and service that our customers have come to expect from Orbia Alphagary. This expansion is a direct reflection of our commitment to staying ahead of market trends and continuously enhancing our capabilities.

The expansion project began in July, with the new assets expected to be operational by the fourth quarter of 2024. The new production line will feature state-of-the-art equipment with advanced safety features. Rick Correia, Operations Director at Orbia Alphagary stated, “We are committed to incorporating the latest safety technologies in our operations that will significantly enhance the working environment for our employees, reduce potential risks and improve overall efficiency. This investment in safety is just as important as the increased production capacity, because we believe that operational excellence starts with the well-being of our people and the reliability of our processes.”

A comprehensive analysis was conducted to select the most suitable equipment for the expansion. The chosen equipment is designed to use less energy and reduce waste, contributing to a more environmentally friendly production process. This commitment aligns with Orbia Alphagary’s ongoing efforts to minimize its environmental impact and conserve natural resources.

This expansion underscores Orbia Alphagary’s dedication to innovation, sustainability and customer satisfaction. The new production capabilities will strengthen the company’s position in the market and enhance its ability to provide high-quality materials for critical applications.

www.orbia.com

www.alphagary.com

#alphagary#orbia.#modernplasticsindia #modernplasticsasia #modernplastics#plasticsnews#plasticsplanet #modernrecyclingindia#modernplasticsglobal#modernplasticsworld#plasticstalk#modernplasticsgermany#modernplasticsnetwork #plasticdevelopment

ORAC Selects Styrolution PS ECO Grades For Its 3D Duropolymer Wall Panels

Belgian company Orac, a leading innovator in decorative interior design, has selected INEOS Styrolution’s sustainable bio-attributed materials for its new line of 3D Duropolymer wall panels, marking a significant step towards a more sustainable future. The new panels will be produced using Styrolution PS ECO 485N BC90, which contains 90% bio-attributed feedstock, and Styrolution PS ECO 158N BC100, made from 100% bio-attributed feedstock. Both polystyrene grades are made using renewable feedstock, based on a mass balance process certified under ISCC PLUS by a third party.

This collaboration highlights Orac’s commitment to sustainability with the 2024 launch of its 100% bio-circular Duropolymer panels. While Duropolymer has long been part of Orac’s product range, the company’s innovative approach now redefines its lifecycle. By combining bio-attributed feedstocks with recycled post- consumer and post-industrial waste, Orac achieves a fully bio-circular product. The ISCC PLUS certification for Orac’s bio-circular panels further underscores the integrity of its environmental efforts, setting a new benchmark for responsible decorative solutions.

“We are fully committed to leveraging our resources as a company to address climate change. Our goals of achieving carbon positivity by 2050 and bio-circularity by 2045 are both ambitious and essential. These targets demand large-scale innovation, and our partnership with INEOS Styrolution is a major step in driving us toward these objectives,” says Miguel Knockaert, R&D Director at Orac.

With INEOS Styrolution’s high-performance sustainable materials, Orac is able to meet the growing demand for eco-friendly products while maintaining the design flexibility and quality for which they are known. This collaboration not only emphasises the environmental benefits of mass-balanced, bio-attributed materials but also reflects both companies’ commitment to driving innovation in sustainable interior design.

“Orac’s selection of our sustainable bio-attributed materials for their 3D Duropolymer wall panels showcases our commitment to eco-friendly solutions. Made from renewable feedstocks and recycled materials, our ISCC– certified polystyrene grades support Orac’s sustainability goals. We look forward to further collaboration on additional sustainable options,” comments Ute Braunewell, Account Manager North & East Europe.

www.ineos-styrolution.com

#.ineos#modernplasticsindia #modernplasticsasia #modernplastics#plasticsnews#plasticsplanet #modernrecyclingindia#modernplasticsglobal#modernplasticsworld#plasticstalk#modernplasticsgermany#modernplasticsnetwork #plasticdevelopment

UNION PARTNERS WITH ENVALIOR TO DELIVER SUSTAINABLE SNOWBOARD BINDING MADE OF DURETHAN  BLUE

• The asymmetric snowboard binding features Envalior’s Durethan Blue, an eco-friendly nylon, allowing Union Binding Company to create its most sustainable snowboard binding yet.
• Durethan Blue, made from 90% sustainable raw materials using a mass balance approach, includes bio-based, recycled content and provides high flow and heat stabilization.
• Durethan Blue has met all of Union Binding Company’s internal quality control standards for strength, cold temperature durability, and overall product lifecycle.

Envalior today announces it has partnered with Union Binding Company, a snowboard binding manufacturer based in Italy, to deliver redesigned Travis Rice Falcor Signature Snowboard Bindings. The asymmetric binding utilizes Envalior’s Durethan Blue, a nylon, which enables Union to make its most sustainable snowboard binding to date. The new material is a member of Envalior’s sustainable product family, attributed with 90% of sustainable raw materials, based on a mass balance approach via the International Sustainability and Carbon Certification (ISCC) PLUS certification program that ensures sustainability and traceability throughout the supply chain.

What makes the redesigned snowboard bindings unique is the all-new 2 Layer baseplate construction, which allows for two individual layers: the core and the frame. The two layers enable the use of unique engineering materials to achieve the desired ride and feel of the binding. Durethan BLUEBKV315ZH2.0 allows the core of the binding to be stiff and responsive, while the frame is softer and more flexible than traditional snowboard baseplates, allowing for a unique ride feel and increased side to side freestyle flex.

Performance meets sustainability

Union selected Durethan  Blue for its redesigned snowboard binding because the material is partially crystalline thermoplastics, offering high mechanical strength and stiffness, good dielectric properties, and good friction and wear properties. It serves as the ideal drop-in replacement for fossil-based products. Durethan is offered as bio-based, mass balanced, and recycled-based and leads to a product carbon footprint reduction of more than 60% CO2-eq in comparison to conventional, fossil based material.

Ninety percent of Durethan Blue’s raw materials are sustainable, based on a mass balance approach, which allows companies to track the flow of sustainable and non-sustainable materials within their supply chains.The ISCC PLUS certifications assure that the amount of bio-based or recycled material corresponds to the amount used in production processes. Manufacturers can gradually transition away from fossil resources to renewable alternatives while maintaining product quality and performance.

Durethan  Blue has passed all of Union’s in-house quality control tests for strength, durability in cold temperatures and product lifecycle. Every pair of Union bindings goes through rigorous testing during the R&D and design phase, initial production and the main production cycle.

”At Envalior, we are committed to sustainability, and this innovative solution demonstrates that sustainability and high performance can coexist, thanks to our ISCC-certified material and mass balance concept,” said Günter Margraf, Director of Sustainability for Envalior. “Our material meets the demands of winter sports without compromising performance, and we’ve integrated this solution into our existing production processes, making the shift to sustainable options easier. Sustainability isn’t just a goal—it’s the path forward.”

“Union is committed to increasing the use of more environmentally friendly materials because it’s crucial to show that we can continue to use plastics in our lives—as long as we find sustainable options and use them responsibly. This approach ensures we’re not compromising the future of our planet,” said Pier Patriarca, Lead Product Engineer at Union Binding Company.

www.envalior.com

#envalior#modernplasticsindia  #modernplasticsasia #plasticsislife  #plasticstalk#modernplastics #modernplasticsworld #pasticsnews #plasticsisgood #plasticsplanet#plasticsrecycling#plasticmagazine #PlasticIndustry#modernplasticsmiddleeast #indianmagazine #innovations #modernplasticsamerica #modernplasticsbangladesh #modernplasticsasia #modernplasticsitaly

HORIZON MICROTECHNOLOGIES RECEIVES ESA SPARK FUNDING TO ADVANCE 3D PRINTING AND METALLISATION TECHNOLOGY FOR SPACE APPLICATIONS

Horizon Microtechnologies can today announce that it has secured funding in the framework of the European Space Agency’s (ESA) SPARK programme administered by the Center for Satellite Navigation Hesse GmbH, CESAH. This funding marks a significant milestone in Horizon’s journey, fuelling the development of its advanced 3D printing and metallisation technology to meet the rigorous demands of space applications.

The Spark funding will enable Horizon to refine its technology and demonstrate that its 3D- printed, metallised components are capable of meeting the extreme requirements of the space environment. By developing components that can withstand the harsh, unserviceable conditions of space, Horizon is proving that its technology is not only innovative but mature enough to address the ultimate engineering challenge.

“Receiving ESA Spark funding is a powerful step forward for Horizon,” says Andreas Frölich, Horizon’s CEO. “Space applications demand the highest standards of performance, longevity and reliability, and this support from ESA through CESAH is a testament to the potential we have to drive innovation in space technology.”

Horizon’s unique approach integrates the precision and design flexibility of 3D printing with advanced metallisation processes. For space applications, this means lighter, more compact components that maintain structural integrity and functionality, even in extreme conditions.

Weight reduction, or SWaP (Size, Weight, and Power), is a crucial factor in space missions, as every gram counts toward efficiency. With Horizon’s technology, components can be made lighter without sacrificing durability — a game-changer for space design and mission success.

Additionally, Horizon’s technology supports the creation of monolithic components with complex geometries that would be challenging to achieve with traditional manufacturing techniques. This opens the door to novel design options, enabling engineers to build components that are both functionally robust and optimised for space constraints.

Frölich continues, “This project does more than just position Horizon’s technology within the space sector, it also paves the way for broader industry adoption. Success in space — the most demanding of environments — provides a compelling proof-of-concept for sectors such as telecommunications, aerospace, and defence, where reliability and endurance are paramount. If Horizon’s components can thrive in space, they can certainly meet the high standards of terrestrial applications.”

Looking ahead, the ESA-supported project represents a vital step in Horizon’s mission to advance 3D printing and metallisation technology for high-performance applications. By participating in the ESA Spark program, Horizon is building a foundation of credibility and performance that will drive the company toward even greater achievements.

Frölich concludes, “Horizon Microtechnologies is thrilled to embark on this next phase of growth, backed by ESA Spark funding and inspired by the possibilities of space innovation.

As the company continues to push the boundaries of what is possible with 3D-printed, metallised components, we invite our partners, customers, and the wider technology community to join us on this exciting journey.”

www.3dmicrofabrication.com

#3dmicrofabrication#modernplasticsindia #modernplasticsasia #plasticsislife

#plasticstalk #modernplastics #modernplasticsworld #plasticsnews

#plasticsisgood #plasticsplanet #plasticsrecycling