Tuesday, June 23, 2026
spot_img
Home Blog Page 277

Stop Bottling Of Manasarovar Water

Much has been written about the ills of bottled water. About the ugly plastic waste it generates. About the massive price difference between a bottle of mineral water and a bottle of tapwater when the quality is often not very different. About how plastic is landing up in fish, in the stomachs of cows and other animals that humans eat. And yet, the peddling of water in plastic bottles continues unabated.

But recently, an entirely new milestone of senselessness was reached. A project to bottle the water of Manasarovar, one of the world’s highest freshwater lakes located in Tibet was revealed. The news was tucked insignificantly in the midst of other announcements related to Prime Minister Modi’s much publicized trip to China.

The Tibetan plateau is the largest and highest plateau in the world. Monikers such as “Roof of the World”, “Water Tower of Asia”, “The Third Pole” and the “Barometer of Asia” indicate the significance of the region. Many of the mighty rivers of Asia such as the Brahmaputra, Sutlej, Indus and Karnali (or Ghagara), an important tributary of the Ganga originate in Tibet, close to Manasarovar. These rivers are the lifeblood of South Asia and have shaped entire civilizations.  Even the famous Asian monsoon, on which depends the economy of the region, is generated and controlled by the Tibetan plateau.

Unfortunately, the forces of climate change and environmental degradation have rendered the Himalayan region very fragile. Melting of glaciers, degradation of permafrost layers, shrinking of lakes and drying of wetlands are clearly visible. Unchecked mining operations aided by the building of the Qingai-Tibet Railway are inflicting severe damage on the region and are highly resented by the locals. Half the world’s population is threatened by the current trend of environmental disturbances.

In the midst of all this comes the unsettling news of a bottling plant with a religious spin to it. The lady behind it is Shanghai-based Vaishali Midha, wife of Amit Midha, the Asia-Pacific chief of computer manufacturing company Dell. Announcing excitedly to the press on May 16 that bottles of water from the Manasarovar would be sold in India from October 2015, she said the bottle caps would be made of the holy beads called rudraksha, which are associated with Shiva. “Not everyone can make the journey to Mansaarovar, so we would like to bring its water to them,” she gushed. “We will also include a scroll of verses to be chanted in order to pay homage to God Shiva,” she added.

By now, it is common knowledge that plastic bottles used for bottling water are causing enormous environmental damage all over the world. Not only is fossil fuel being used in its manufacturing process but the polyethylene terephthalate (PET) used to make bottles is not biodegradable. Most bottles are not being recycled in any useful manner and are being thrown away to often form unsightly mountains of garbage. Plastic pollutes waterways, contaminates soil, and sickens animals (which are often eaten by humans). According to a UNEP-IUCN report, over 46,000 pieces of plastic litter are floating on every square mile of ocean today.

In India, a bottle of mineral water costs about Rs 20 (US$ 0.30) on an average. But the holy water from Manasarovar will be priced at Rs 80 (US$1.25) per bottle. There are some other expensive brands in the market, which claim to offer Himalayan spring water enriched with minerals. But, as in the rest of the world, quality of bottled water is not regulated or held to the standards that tapwater is. In many cases, manufacturers were found to be packaging municipal water in their bottles.

There is no dearth of bottled water plants in India and China. Why then is there a need for yet another one in an ecologically fragile area like Tibet?

Most importantly, the Manasarovar is not your average freshwater lake in some mountain. For Hindus and Buddhists, the lake is sacred and a part of folklore as well as history from ancient times. It is located close to Mount Kailash, which is said to be the abode of Shiva. Tranquil and awe-inspiring, the mountainous environs of the lake are said to make even the not-so-religious feel humbled by the presence of a higher power.

The pilgrimage to Manasarovar, which can be reached only after an arduous trek through the Himalayas, is not for the weak or faint-hearted.  The waters of the lake are the hard-earned reward for those who accomplish the journey. Pilgrims who take a dip in Manasarovar believe they are absolved of their sins.

Bottling such water for commercial purposes makes a mockery of the very god in whose name the water will be sold. The bottles with Shiva’s teachings will only end up in garbage heaps. “How can we kill our rivers by making the water unfit for consumption, and then consume packaged plastic-wrapped spirituality?” questions Chitra Raman, an Indian-origin writer based in Michigan.

The world does not need more plants to bottle water. But it urgently needs to sustainably upgrade municipal water and wastewater infrastructure of cities and towns. 750 million people in the world lack access to safe water. 2.4 billion lack adequate sanitation. At the same time, millions of litres of water are being lost through leaks and thefts from pipelines during the process of delivery worldwide. Preventing those leaks and thefts with better technologies and management could increase water supply even without tapping new resources. Better sanitation would help to improve people’s health as well as prevent pollution of land and water.

Service providers need to focus their energies on improving the quality of tapwater and supplying it round the clock, while also recovering costs. They need to find ways to treat and recycle used water as well as to generate energy from waste.

Today, global activists are engaging with religious leaders of the world to emphasize a sacred duty to protect the environment. But, an understanding of the interconnectedness of nature is already intrinsic to both Hinduism and Buddhism.  One common morning prayer in Sanskrit that has come down from the ancient times includes a verse asking for forgiveness for walking over ‘Mother Earth’. The Manasarovar bottling project goes totally against the principles of environmental preservation highlighted in Hindu and Buddhist philosophy. It must be opposed strongly.

REMONDIS and Werner & Mertz cooperate on plastics recycling

REMONDIS and Werner & Mertz cooperate on plastics recycling

The current global political situation with the continuing pandemic-related breakdowns in global supply chains, the struggle to find economic solutions to climate change and, last but not least, the increasing shortage of raw materials due to war, is once again placing greater focus on the environmental service branch. Material recycling and plastics recycling in particular hold considerable potential for ensuring the supply of raw materials in the face of interrupted supply chains and planetary limitations, while at the same time protecting the climate and resources.

The targeted promotion of plastics recycling requires a bundle of measures that can simultaneously ensure economic stability and achieve the set climate and resource targets. The overall economic goal must be to make the product label “Made in Germany” a synonym for real sustainability worldwide.

To achieve this, it is necessary that the issue of resources – as is the case with renewable energies – is now given the legal status of being of “overriding public interest”.

Werner & Mertz and REMONDIS are calling on politicians to provide the right incentives to ensure that sustainable production in the sense of design for recycling and the highest possible use of recycled materials is placed in a better position on the market than non-sustainable products and packaging. To this end, it is necessary to implement political instruments with a real incentive effect. The plastic tax is a sensible approach if – unlike current practice – it is equipped with a corresponding steering effect. This means that it should only be levied on the distributors of environmentally harmful virgin material, while post-consumer recyclables must be tax-exempt. Complementary to this, a targeted use of the tax revenue would be helpful. This could be achieved by converting it into an earmarked levy that is distributed primarily to the distributors of recyclable packaging. If such a conversion should not be feasible for legal reasons, the same effect could be achieved through a corresponding fund, for which corresponding scenarios already exist at UBA and the Central Packaging Register Office.

The two companies have now joined forces under the umbrella of the Recyclat Initiative to demonstrate how plastic cycles can be fully closed using practical application examples. The common goal is to establish sustainable material cycles and to use the recyclable material from the source “yellow bag” for this purpose.

During a joint press conference at IFAT, Reinhard Schneider, managing partner of Werner & Mertz, Herwart Wilms, managing director of REMONDIS, and Dr Nabila Rabanizada, technical manager for plastics recycling at REMONDIS, explained the path taken by the raw material from the yellow bag via the further developed mechanical processing back into the production cycle and into new sustainable packaging.

The panel participants also reiterated their demand for improved political framework conditions in the EU.

Reinhard Schneider, Managing Partner of Werner & Mertz: “The recyclate initiative of Werner & Mertz has proven that high-quality recyclate can be obtained from household collection. In order to compensate for the continuing lower prices for virgin material and to trigger high-quality applications for recycled raw materials in the sense of closed loops, I am campaigning for the introduction of a plastic tax on virgin material.”

Herwart Wilms, managing director of REMONDIS, added in this context that the introduction of a polluter-pays tax on non-recycled old plastic packaging, the so-called “plastic tax”, could only have the desired steering effect if it was used in a targeted manner:

“In order to promote the recycling of plastics more strongly and make it a successful model with a worldwide exemplary character, the tax would have to be converted into a purpose-bound levy. Only in this way could sustainable production be promoted in a targeted way instead of using the tax money for other tasks.”

While the largely loss-free recycling of raw materials such as glass, metal and paper has been established practice since the beginning of the circular economy in the early 1970s, plastics have so far been considered a rather poorly recyclable material. Especially in countries where neither functioning collection systems nor sorting and recycling capacities exist, plastic waste increasingly pollutes soils and waters.

Both cooperation partners are working together to further optimise plastics recycling in Germany and Europe and to develop it into one of the key solutions for overcoming the global plastics crisis.

https://www.werner-mertz.de/

Berry’s New India Facility Starts to Take Shape for Growing Healthcare Market

Berry’s New India Facility Starts to Take Shape for Growing Healthcare Market

Berry Global has begun construction of its new manufacturing facility and global Centre of Excellence in India.

Based in Sira, close to the company’s existing operation in Bangalore, the new factory will offer world-class capabilities to serve the healthcare and other key market sectors. It will enable Berry to extend its R&D innovation expertise and scale up production to support growing demand from customers throughout India and South Asia, offering best in class quality and service to both national and international businesses, as well as local and start-up companies.

In particular, the site will have International Sustainability and Carbon Certificate (ISCC) Plus accreditation. This enables it to sell to healthcare customers certified packaging and plastic components that contribute to a circular economy approach, based on advanced recycling and mass balance. Mass balance is an accepted chain of custody methodology that documents and tracks recycled and/or biobased content from suppliers through to final delivery to customers.

The Sira facility will consolidate Berry’s leading position in the design, development and production of patient-centred healthcare solutions, including ophthalmic, nasal pumps, inhalation, and injectable administrations. Central to this are the company’s technical and design skills in the creation of products that improve the patient experience for the administration of medicines and ensure the highest levels of functionality in areas such as ease of use, dosage control, and effective medicine protection, while also helping to meet customers’ sustainability goals.

The manufacturing facility will house the latest precision high-quality manufacturing equipment along with a dedicated R&D Centre of Excellence to support the design and development of new products and customer-specific projects.

“This latest investment demonstrates our commitment to establish strategically-placed facilities throughout the world that will enable us to bring our global expertise and localised support to customers of any size,” commented Jean-Marc Galvez, President, Consumer Packaging International (CPI) Division. “It will allow us to further strengthen existing customer partnerships and develop new business opportunities in this important region.”

Construction of the 15-acre site began with the traditional Pooja ceremony and the laying of the foundation stone. Building work is now in progress with the clean room expected to be operational by the end of this year and full completion of the factory by Spring 2023.

 

https://www.berryglobal.com/

UNITED CAPS Appoints Vincent Chauvier to Newly Created CFO Role

UNITED CAPS Appoints Vincent Chauvier to Newly Created CFO Role

As the company expands globally in line with its Close to You strategy, more complex financial management requirements and supply chain challenges are better addressed at the CFO level

UNITED CAPS, an international manufacturer of caps and closures, announces the appointment of Vincent Chauvier as Chief Financial Officer, a promotion from his previous role as Finance Director.

Chauvier has an extensive track record in the financial field across a variety of companies and industries. He started his career with accounting firm KPMG working his way up to Audit Engagement Manager. Subsequently, Chauvier had financial management roles with a variety of companies, including his most recent role as Vice President of Finance & Administration for Ion Beam Applications S.A. where he was the Regional CFO and also oversaw legal, sales and marketing operations. He joined UNITED CAPS in November 2020 as Finance Director. In his new role, Chauvier will sit on the Executive Committee as a permanent member and report to CEO Benoit Henckes.

“We are delighted to have someone of Vincent’s caliber on board,” Henckes said. “Since he joined us in 2020, he has proven to be a good leader and an exceptional financial manager with a terrific background across many different financially oriented disciplines. Vincent will play an important role in the CFO position as UNITED CAPS transforms into a global organization. He will augment our capabilities to manage the additional complexities and opportunities that growth brings as well as help to navigate the ongoing impact of COVID on supply chains.”

Henckes adds that the CFO role is also necessary since UNITED CAPS is now a bigger company than ever with capacity to grow even further, fueled by customer demand thanks to significant investment in R & D capability and production capacity – a great example of the company’s R & D expertise being the fact that over 50% of the caps it produces are bespoke.

“I’m looking forward to taking on this new role,” Chauvier added. “My tenure at UNITED CAPS has been a pleasure so far. It’s an exciting and innovative company, a leader in its segment, and with a talented team that feels like family. I am excited to be able to contribute to its continued growth as Chief Financial Officer.”

For more information about products and services from UNITED CAPS, please visit
www.unitedcaps.com.

Archroma introduces new eco-advanced wood protection technology Siligen® MIH liq developed with University of Goettingen

Archroma introduces new eco-advanced wood protection technology Siligen® MIH liq developed with University of Goettingen

Archroma, a global leader in specialty chemicals towards sustainable solutions, introduces a Siligen® MIH liq, a new eco-advanced wood protection technology developed together with the University of Goettingen, Germany.

Being a natural raw material, wood evolves over time, and that’s what makes it so unique and beautiful. At the same time, it is a precious, sustainable and carbon-storing resource that should not be wasted. Wood is especially sensitive to climate conditions, in particular moisture, as well as fungi, termites and marine organisms. Over time, these can alter the wood strength, stability and durability. Most treatments used to protect wood are based on biocides and can contain potentially toxic substances such as heavy metals.

Archroma and the University of Goettingen, Germany therefore decided to explore a solution to extend the life duration of outdoor wood materials, but also their appearance.

The result: Siligen® MIH liq, an eco-advanced wood modification treatment to create more stable and durable solid woods, veneers and wood-based composites for applications such as windows, facade claddings, outdoor furniture, terrace decking, in-ground platforms, parquet flooring and marine applications.

It is applied by impregnation and subsequent drying. Siligen® MIH liq impregnated wood can be dried and the molecules fixated at < 80 °C with an equipment already available at most production facilities applying conventional biocides. The energy consumption is thus similar to most aqueous biocidal wood preservative treatments.

Wood treated with Siligen® MIH liq shows excellent protection against decay fungi. Treated wood displays improved weathering performance and keeps its natural appearance with less discolorations and change in feel.

Siligen® MIH liq will be introduced at the Annual Conference of the International Research Group on Wood Protection (IRG WP) IRG53 conference in Slovenia taking place on 29 May to 2 June, 2022 in Bled, Slovenia.

Prof. Holger Militz, Head of the Department of Wood Biology and Wood Products at the University of Göttingen, Germany, adds: “Our research has been focusing for many years on the development of new wood protection systems. With Siligen® MIH we explored a system where the wood is protected against fungi and termites without the need of complicated treatment technology. Existing vacuum and pressure plants and normal wood dryers are sufficient to use this new technology.”

Miquel Vila, Global Head of New Markets at Archroma, comments: “We are very excited to collaborate with like-minded partners such as the University of Goettingen. The new eco-advanced wood protection technology Siligen® MIH liq is a great illustration of “The Archroma Way to a Sustainable World: Safe, efficient, enhanced, it’s our nature.”

Plastic Pipe Award Winners Announced

INDUSTRY PROJECTS AND MEMBERS AWARDS ANNOUNCED

Winners in Each Plastics Pipe Institute Division

The Plastics Pipe Institute, Inc. (PPI) announced the winners of its Projects and Members of the Year program during its annual membership meeting, which was held in Scottsdale, Arizona, May 15 – 18, 2022. PPI is the major North American trade
association representing the plastic pipe industry.

“Aside from the excitement of announcing the winners of our industry competition,” stated PPI President David M. Fink, “there was a true sense of delight from our more than 368 members who attended because this was the first annual membership meeting that we were able to hold in person for more than three years.”

Each year the membership reviews and votes on Project of the Year and a Member of the Year for each of the five PPI divisions – Building & Construction, Drainage, Energy Piping Systems, Municipal & Industrial, and Power & Communications. Winning projects ranged from helping three Texas rural communities restore their water supply to a drainage system for a warehouse that required more than 17 miles of pipe. The PPI Member of the Year Award is for an individual’s outstanding support and contributions to the association and the industry.

PPI winning projects and members are:

PPI Building & Construction Division Project of the Year

  • This Is The Place Heritage Park, Salt Lake City, Utah
  • PPI Member Company: REHAU Construction LLC (Leesburg, VA)

Plastic Pipe Award Winners Announced

More than 40,000 feet of REHAU RAUPEX pipe was used for the SIM system at the Utah Heritage Park.

Plastic Pipe Award Winners Announced

Jonathan Bittenbender, director, engineering of REHAU receives the Project of the Year Award from PPI President David M. Fink.

This Is The Place Heritage Park recreates the West as it was in the early settlement of Utah and has rides and exhibits plus meeting and wedding venues. Visitors can enjoy the beauty of the Utah winter while being introduced to the benefits of a hydronic snow and ice melting (SIM) system installed on the nearly 30,000 square foot walkway, keeping it clear and safe. More than 40,000 feet of REHAU RAUPEX pipe was used to make up the 165 loops for the system.

PPI Drainage Division Project of the Year

  • Greencastle, Pennsylvania Warehouse Distribution Center
  • PPI Member Company: Advanced Drainage Systems, Inc. (ADS), Hilliard, Ohio

Plastic Pipe Award Winners Announced

The largest of five retention beds was constructed from 24,500 ft (4.64 miles) of 60-inch diameter corrugated HDPE pipe. Photo shows the bed 50 percent completed.

 Plastic Pipe Award Winners Announced

Tori Durliat, director of marketing for Advanced Drainage Systems, Inc. with the Project of the Year plaque.

A new warehouse facility in Greencastle, PA required a large amount of underground storage beneath the proposed loading and parking areas. This project had five large retention beds that included more than 17 miles of ADS N-12 ® corrugated HDPE pipe, as well as fittings, gaskets, Nyloplast drains/grates and FlexStorm inlet filters. The need for the underground, watertight system was due to the karst geology of the area and the vast impervious area of some 83 acres.

PPI Energy Piping Systems Division Project of the Year

  • Frontier Natural Gas, Elkin, NC
  • PPI Member Companies: Performance Pipe (Plano, TX), and The Dow Chemical Company (Midland, MI)

Plastic Pipe Award Winners Announced

Frontier Natural Gas used more than 50,000 feet of the new pipe in its 100-psi gas distribution system.

Nik Koganti of Performance Pipe (left) and Dell Doyle of Dow (center) with PPI’s Randy Knapp, the director of engineering for the association’s Energy Piping Systems Division.

At the request of Frontier Natural Gas, Performance Pipe and Dow collaborated and expedited the commercialization of a solid yellow, bimodal PE4710 option, DriscoPlex ® 8400 Series Gas Distribution Pipe. The utility used more than 50,000 feet of the new pipe in its 100-psi gas distribution system. The bimodal PE4710 pipe provided the improved physical properties
Frontier needed.

PPI Municipal & Industrial Division Project of the Year

  • Saving Texas Water Supply, Red River Basin and Aspermont, Texas
  • PPI Member Companies: The Dow Chemical Company (Midland, MI), Pipeline Plastics LLC (Westlake, TX), Modern Dispersions, Inc. (Leominster, MA) and McElroy Manufacturing, Inc. (Tulsa, OK) .

 Plastic Pipe Award Winners Announced

Nearly eight miles of HDPE PE4710 pipe was used to rebuild the potable lines for three rural Texas communities.

The team that brought water back to rural Texas celebrates winning the Project of the Year for PPI’s Municipal & Industrial Division.

Winter storm Uri that hit Texas did more than bring record setting cold temperatures. It froze and snapped potable water lines, stopping water from flowing to the three rural communities of Carey, Northfield and Aspermont, south east of Amarillo. The broken water pipe problem was solved by the emergency efforts of a group of high-density polyethylene (HDPE) pipe companies, and PPI. Dow donated the resin to make the pipe. Pipeline Plastics, which has several manufacturing plants in western Texas, contributed the manufacturing end. Modern Dispersions provided the carbon black, a key ingredient added to the resin, and McElroy Manufacturing, whose fusion equipment was used, provided the training for the Carey/Northfield project.

PPI Power & Communications Division Project of the Year

  • Data Center
  • PPI Member Company: WL Plastics (Ft. Worth, TX)

Twenty four individual strands of HDPE conduit were installed at the same time for a new data center.

 Plastic Pipe Award Winners Announced

Barb Donaldson, WL Plastics, receives the Project of the Year award from PPI President David M. Fink.

For a new data center, PPI member company, WL Plastics, provided 165,000 feet of four- inch diameter DR 11 orange solid wall HDPE conduit that was installed by pulling 24 conduit strings at the same time in 400-foot segments using horizontally directional drilling (HDD). The HDD installation was possible due to the flexibility of the conduit, and necessary because of the many environmental barriers and a very short installation timeframe. This project demonstrates how multiple strands can be pulled at once, reducing disruptions to the environment, traffic, creek systems and life around the installation site.

PPI Members of the Year
PPI Building & Construction Division Member of the Year

  • Mike Casavant
    HeatLink

 Plastic Pipe Award Winners Announced

Lance MacNevin, P. Eng., (left) director of engineering for PPI’s BCD, congratulates Mike Casavant.

PPI Drainage Division Member of the Year

  • Greg Bohn
    Advanced Drainage Systems, Inc.

 Plastic Pipe Award Winners Announced

PPI President, David M. Fink (left) congratulates Greg Bohn.

PPI Energy Piping Systems Division Member of the Year

  • Greg Goble
    RW Lyall

PPI President, David M. Fink (left) presents the EPSD Member of the Year Award to Greg Goble.

PPI Municipal & Industrial Division Member of the Year
The Municipal & Industrial Divisional Appreciation Award was presented to each of the 17 PPI members serving as AWWA C901, AWWA C906 and M55 Subcommittee members.

 Plastic Pipe Award Winners Announced

PPI Power & Communications Division Member of the Year

  • David Gerstetter
    UL, LLC

 Plastic Pipe Award Winners Announced

 

The Plastics Pipe Institute Lifetime Achievement Award

Plastic Pipe Award Winners Announced

Gene Palermo, Ph.D.(right) was presented with the PPI Lifetime Achievement Award for his nearly five decades of contributions to the plastics pipe industry. PPI President David M. Fink presented the award to Dr. Palermo during the association’s annual meeting in May.

More information can be found at www.plasticpipe.org.

Belden’s Q2 2022 Product Launches Include High-Performance Solutions

Belden’s Q2 2022 Product Launches Include High-Performance Solutions

Belden, a leading global supplier of specialty networking solutions, announces six Q2 2022 product launches that give customers new integration capabilities, new ways to safely carry power over long distances and products with fast lead times.

Networking and Software:

  • Hirschmann BXS Gigabit Switches provide a reliable, cost-effective solution for industrial engineers and train builders who need to ensure fast, powerful connectivity to end devices and passenger infotainment systems without using additional cabling.
  • Hirschmann GREYHOUND 105/106 Ethernet Switches combine hardened industrial hardware with high-performance switching capabilities to deliver fast, secure, cost-effective and futureproof connectivity.

Connectivity:

  • Lumberg Automation LioN-X® IO-Link Masters now offer integration possibilities into PLC environments from Mitsubishi with CC-Link IE Field Basic to leverage networking on production floors. An IODD interpreter enables uploads of IODD files on webservers to easily parametrize any connected IO-Link sensor or actuator.

Cable:

  • Belden’s Digital Electricity™ (DE) Class 4 Cables recently received the industry’s first Class 4 certification from UL. As buildings become more intelligent, Digital Electricity Cables can support safe and efficient emerging digital power technologies by carrying close to 20 times the power that Power over Ethernet delivers, over hundreds of meters, offering a safe alternative to AC power.
  • Belden OSP Dry Loose Tube Cables are designed with gel-free technology. To prevent water migration, the sub-units contain superabsorbent materials (SAP) instead of gel. With a current lead time of eight weeks—28 weeks faster than the competition—these cables can be on the jobsite fast to help customers finish jobs on time.
  • Belden RS-485 Cables ensure safety, reliable connectivity and performance—even across long distances. Flame-retardant B2ca and Cca cables reduce the risk of harm to people and equipment in the event of fire.
    To learn more about these solutions, as well as the types of technology and applications they support, visit www.belden.com/new-products.

Messe Frankfurt India’s spectacular run of back to back trade shows and conferences this May brings back business vigour.

Messe Frankfurt India’s spectacular run of back to back trade shows and conferences this May brings back business vigour.

Supporting the resurgence of a covid-dented economy, Messe Frankfurt India hosted a series of live exhibitions in the financial capital across diverse industry verticals; introducing market-leading innovations by over 600 companies and attracting over 50,000 visitors across 28 Indian states and union territories locally and 57 countries and 6 continents internationally.

Messe Frankfurt India’s

 

Making a grand comeback in the financial capital – the Indian subsidiary of the world’s leading German exhibition organiser – Messe Frankfurt hosted nine back-to-back physical exhibitions and conference, this May. This includes the Mumbai debut of Gartex Texprocess India, Denim Show alongside Screen Print India, the successful trade fair trio of Paperworld India, Corporate Gifts Show, Interior Lifestyle India presented by Ambiente India, its flagship Media Expo and LED Expo fairs and the renowned NGV India Summit.

Targeting diverse industry verticals such as textiles, printing, signage, advertising, stationery, corporate gifting, homeware among others, the b2b platforms organised by Messe Frankfurt India facilitated the exchange of the latest sector developments, business, technological breakthroughs, and industry collaborations. “The energy and business enthusiasm among attendees was contagious. The industries are back in action, there is a high-level of commitment to strengthen domestic collaborations and bolster supply chains and exhibition platforms create the perfect business encounters to meet these objectives,” said Mr Stephan Buurma, Member of the Board of Management, Messe Frankfurt Group.

Making its Mumbai debut, Gartex Texprocess India was inaugurated by Smt Darshana Jardosh, Hon’ble Union Minister of State for Textiles and Railways, Government of India, and succeeded in drawing 9,328 visitors. With Denim Show, Screen Print India, Fabrics and Trims Show held under its umbrella, the Mumbai launch of Gartex Texprocess India 2022 displayed the right mix of manufacturing tools and textile products by 120 exhibitors, attracting footfalls from and 253 cities across 28 Indian states and 27 countries. Additionally, the trade fair hosted insightful knowledge sessions on the most unique and intriguing topics for the denim industry.
Alongside the launch, the trade fair trio of Paperworld India, Corporate Gifts Show, Interior Lifestyle India presented by Ambiente India was inaugurated by Shri Aslam Shaikh, Hon’ble Minister of Textile, Fisheries and Port Development, Government of Maharashtra bringing together 215 exhibitors and proved to be a massive success drawing in 14,615 trade visitors from 230 cities across 27 Indian states and 38 countries over its three days.

Held in the same week at Bombay Exhibition Centre, the 48th edition of Media Expo concluded on an equally high note highlighting the transition towards innovative, sustainable and eco-friendly advertising solutions. Bringing the printing, signage and advertising industries under one roof, the event garnered a record-breaking footfall of 13,199 visitors and buyers from 15 countries, and 306 cities across 27 Indian states who were treated to top innovations and technologies from 127 exhibitors, including 17% new participants on its show floors.

Following the successful run of seven trade fairs, India’s premier business event for LED and lighting technologies – LED Expo Mumbai made its grand comeback in the financial capital bringing together 179 exhibitors with over 1,000 products on display. The key business event for the lighting industry attracted 12,934 from 316 cities across 29 states and 21 countries.

Mr Raj Manek, Executive Director and Board Member, Messe Frankfurt Asia Holdings Ltd shared: “Exhibitions have proven to be a highly effective marketing tool and bring sustainable growth. Product presentations, brand awareness, market research, industry collaborations – the commercial benefits of an exhibition are endless. But the highlight will always be ‘connecting people’. The persuasive power of face-to-face marketing builds trust that can create lasting personal relationships.”

As the final business event of the month, the Natural Gas Vehicle (NGV) India Summit garnered an enriching response from 230 industry experts and concluded on a high note with key takeaways for Indian fuel and gas industry. Amid soaring petrol and diesel prices concerning the citizens of India, the NGV India Summit was scheduled at an ideal time, highlighting the importance of natural gas and the way forward in terms of challenges, opportunities and overall acceptance of the clean fuel.
“Messe Frankfurt platforms are known for its international standards, professionalism and are built on trust that has been cultivated over the years of us providing quality services in every aspect of the show. Our exhibitors’ conviction and business confidence in our platforms, the pro-activeness and quality of visitors, the growing confidence of industry associations and government bodies in our vision for industry growth are what keeps us going.” concluded Manek.

Taking this positive momentum forward, Gartex Texprocess India together with Denim Show, Fabrics and Trims Show and Screen Print India will once again welcome businesses back at its base in New Delhi from 4 – 6 August 2022 at Pragati Maidan; Media Expo will introduce the industry to next phase of advertising, print media, and the signage innovations at India Expo Mart, New Delhi from 1 – 3 September 2022; and the 9th edition of the International Elevator and Escalator (IEE) Expo will welcome the industry from 6 – 8 September 2022 at JIO World Convention Centre (JWCC) becoming the first point of industry connect after two years.

For more information about the event, please visit :
www.in.messefrankfurt.com

Avery Dennison and Mactac present new sustainable graphics solutions portfolio at FESPA 2022

Avery Dennison and Mactac present new sustainable graphics solutions portfolio at FESPA 2022

Avery Dennison Graphics Solutions EMENA is continuing its increased focus on sustainability with the launch of new Sustainable Graphics Solutions product portfolios for both the Avery Dennison and the Mactac brands. The Sustainable Graphics Solutions product portfolios give installers even easier and wider access to more sustainable graphics materials, with a new generation of products.

Avery Dennison’s global focus on sustainability has evolved over many years, setting some of the boldest goals in the industry to advance environmental and social sustainability commitments. Alongside ambitious 2025 sustainability goals are recently introduced 2030 sustainability goals. These align with seven of the United Nations Sustainable Development Goals (SDGs), and they were developed based on careful analysis of what is most important for the business and stakeholders.

Elizabeth Park (director innovation and marketing excellence, Graphics EMENA) said that sustainability is now the starting point for many innovations: “When designing Avery Dennison or Mactac products, sourcing our raw materials, and setting up manufacturing, one of the first questions we ask as a corporation is simple: ‘is it sustainable?’ This is the foundation for how we meet our customer’s needs within our commercial teams.“

“Sustainability affects more than just the products we sell, of course – it requires social responsibility, diversity and inclusion both in our workplace and beyond our own ‘four walls’ to the wider external environment. This new sustainable portfolio demonstrates the benefits of education, transparency and collaboration with customers and other value chain partners – it’s how we address industry-wide challenges and the innovations we have achieved represent an invaluable opportunity to position our business for lasting success.”

Products in the portfolio meet one or more strictly defined sustainable criteria – part of the ongoing drive to make sure that our customers have more sustainable options. These latest innovations include Avery Dennison Organoid Natural Surfaces, made using renewable materials, along with the newly launched premium PVC-free digitally printable wrapping film, SP 1504 Easy Apply™. The Mactac portfolio offers PVC-free Squid® Window Textile films as well as paper based products within the WallWrap Series, such as WW Linen Paper, which are sourced from Forest Stewardship Council® (FSC®) certified suppliers. These products are a key part of the transition to Sustainable Graphics Solutions.

Li Wen (senior director and general manager, Graphics EMENA): “As a major global business, we share a responsibility to contribute to a more sustainable future, also benefiting from the resulting opportunities. For us, the words ‘innovation’ and ‘sustainability’ go hand in hand. It is our responsibility to make the most of our knowledge as leaders in science and innovation, so that we design and market our products in a more sustainable way for the future. Among other things, we are sourcing responsibly, reducing our operational footprint, and incorporating an EcoDesign methodology for our product developments.”

For more information on our commitment to Sustainability, you can check the Avery Dennison website and Mactac website, and visit us at stand A50 during FESPA 2022.

Avery Dennison and Mactac will be at stand A50, Hall 3.2, Berlin Messe, from 31 May – 3 June 2022. You will also be able to hear Elizabeth Park giving a talk on the subject of Sustainability at 12:00pm on the 1st of June at the Press Conference Room at FESPA.

Register now for the show: FESPA 2022 – Free Registration Link.

Milliken & Company investment advances its coating additives lab in Ohio, USA

Milliken & Company investment advances its coating additives lab in Ohio, USA

Milliken & Company (“Milliken”), a global material science expert, is excited to share that it has made a significant investment in the coating additives laboratory it acquired in 2020 as part of its purchase of Borchers Americas, Inc., in Westlake, Ohio.

Now known as “Borchers: A Milliken Brand,” the acquired business was founded in 1807 as a chemical company but has since grown into a global provider of performance additives for the coatings, inks, and adhesives markets.

With the Westlake lab investment, the company now has three state-of-the-art coating additives labs globally, with the others located in Langenfeld, Germany and Shanghai, China (which was also upgraded following the acquisition).

The newly transformed lab has an open concept with a vibrant, energizing workspace and upgraded equipment. Designed specifically for coating additives lab work, the space is organized to increase efficiency and collaboration while also providing a safe and comfortable working environment. “We are thrilled with the improvements made in the lab,” said Loulou Rozek, who leads the global technical service team at the facility. “It’s exciting to see that Milliken is investing in both the business and associates by improving the workspace.”

A priority of the remodel was creating an ergonomic work environment that provides a positive, safe atmosphere. “I’m proud to work for a safety-focused company that cares about the health of its people” said Ryan Outrich, technical service chemist.

Milliken took an associate-first approach to the lab update by asking the laboratory team to lead the remodel, allowing associates to design not only the layout but the aesthetic as well. The coating additives team is used to working with colorful paints and wanted a bright, energizing space, selecting vibrant purple, green and orange accent colors to promote creativity. “It’s gratifying to work for a company that asks its lab associates to help design their own workspace,” says Allison Abbey, technical service chemist and co-supplier manager. “I get excited to go to work every day.”

In addition to workspace redesign, Milliken invested heavily in lab and test equipment along with expanding the team. “The lab’s sophisticated new equipment can generate state-of-the-art data for our customers,” Rozek said. The addition of equipment, associates and an upgraded layout approximately doubles project capacity, enabling Milliken to further support customers.

The team began working in the upgraded lab in March and is now welcoming customers to schedule tours, demonstrations, and trainings.

In the future, Milliken plans to further expand their coating additives labs into other regions such as India and Brazil.